Main content

## Algebra 1

### Course: Algebra 1 > Unit 12

Lesson 7: Exponential vs. linear models# Linear vs. exponential growth: from data (example 2)

Sal constructs a function that models cooling water. To do that, he decides whether the function is linear or exponential.

## Want to join the conversation?

- Why is the common ratio raised to the 1/2 power the same as the square root of itself?(9 votes)
- Hi!

I think this can best be shown with a proof. It's actually quite simple.

Let the common ratio be r, and let's let r^(1/2)=y.

So:

r^(1/2) = y

By squaring both sides, we get:

r = y^2

Now we take the square root of both sides:

sqrt(r) = y

And since we know that y = r^(1/2), we can therefore conclude:

r^(1/2) = sqrt(r)(24 votes)

- @3:55Sal uses a fraction in the exponent to solve the problem. His answer does not match the solutions provided and how he does it makes no sense at this point. He completely skipped over how the fraction on the exponent is supposed to work and he's basically using topics that haven't been covered to solve a problem, without explaining why it works. How am I supposed to solve a problem with a tool I don't know how to use?(8 votes)
- Sal uses one of the exponential properties. Heres the link (this unit is after learning abt exponential properties):

https://www.khanacademy.org/math/algebra/x2f8bb11595b61c86:rational-exponents-radicals#x2f8bb11595b61c86:exponent-properties-review

The question wants the answer in terms of t by itself. When you evaluate the question, you get this formula as shown in the video:

80(.8)^(t/2)**t**isn't by itself, it's divded by 2. Now we use one of the properties.

Refer to this: x^(ab) = ((x^a)^b)

We can take out t/2 by using this formula. In multiplication form, t/2 is simply just 1/2 * t.

Using this rule, set a = 1/2 || b = t || x = .8

((.8^(1/2))^t)

.8^(1/2) is simply saying sqrt(.8) (also another exponential property), and that equals roughly .9, and A is your answer.

hopefully that helps !(3 votes)

- How would you define "model"? Thank you !(4 votes)
- Hey Ramon M, there are two different definitions from the dictionary for model (that are nouns), I hope these help!

1: A three-dimensional representation of a person or thing or of a proposed structure, typically on a smaller scale than the original.

2: A system or thing used as an example to follow or imitate.(6 votes)

- hi, why take the square root is the same thing as making its exponent 1/2? like he did at:5:26(3 votes)
- A square root is is A number times that number, right? So if you have a square root of a number, but want to still express that number as an exponent, you put that exponent to half. here is an examle, because i am not good at explaining.

√25 =5

25^1/2 =5

try it out! i hope this helps(4 votes)

- Why is the common ratio raised to the 1/2 power the same as the square root of itself?(4 votes)
- Why is the common ratio raised to the 1/2 power the same as the square root of itself?(1 vote)

- Why is the common ratio raised to the 1/2 power the same as the square root of itself?(2 votes)
- Would there perhaps be a more intuitive way of thinking about why a common ration raise to the 1/2 power is the same as the square root of itself?

Kelvin L.’s answer is great but it would otherwise help remembering it better.(3 votes) - At about5:20, Sal writes 80^1/2^t. I don't understand how he gets there from 80^t/2. How are they the same thing?(3 votes)
- Sal took out the t from the exponent. Since t/2 could be seen as 1t/2, you can just make the exponent 1/2^t(1 vote)

- Sorry I'm confused. Is the temperature decreasing by 80% or 20%. Intuitively, I feel it is reducing by 20%. Am I missing something?(3 votes)
- Is there a rule that dictates what is just "real world error" and what is a fault in the function of the data? For example formula must be accurate within 10% so if you add 15 and then 12.5 with and you have a linear growth function this would be counted wrong(1 vote)
- There is no rule per se. However, you can approximate the error by doing the experiment multiple times. Usually, doing it several times and taking the average gives us the "true value", which is the closest we can get to the correct value (The correct value itself can only be reached if we do the experiment infinite times)

As for the cause of error, there could be many reasons. It could be a human error, where the person making the observation made an error. It could be instrumental errors, where the apparatus you're using is faulty. It could be natural reasons, where abiotic factors change your data.(2 votes)

## Video transcript

- [Voiceover] The temperature
of a glass of warm water after it's put in a freezer is represented by the following table. So we have time in minutes and then we have the
corresponding temperature at different times in minutes. Which model for C of t, the temperature of the glass of water t minutes after it's served, best fits the data? So pause the video and see which of these
models best fit the data. Alright, now let's work
through this together. So in order for it, we see these choices. Some of these choices
are exponential models. Some of these are linear models. In order for a linear model
to be a good description, when you have a fixed change in time, you should have a fixed
change in temperature. If you're dealing with
an exponential model, then as you have a fixed change in time, you should be changing by the same factor so the amount you change from say minute one to minute two or from minute two to minute three, it's not going to be the exact same amount but it should be the same
factor of where you started. So let's think about this. So here, our change in time is two minutes. What is the absolute
change in temperature? So our absolute change in temperature is negative what, 15.7. Negative 15.7 and what if we viewed
it as a multiplication? So what do multiply 80 by to get 64.3? Well, I can get a calculator out for that. So 64.3 divided by 80 is equal to 0.8 I'll just say approximately .8 So we could multiply by .0.8 This is going to be approximate. So to get from 80 to 64.3 I could either subtract by 15.7 if I'm dealing with a linear model or I can multiply by 0.8 Now if I increase my time again by two, I'm going from minute two to minute four, so Delta t is equal to two, the absolute change here is what? This is going to be not 12. This is going to be, my brain isn't functioning optimally. This was 64.7 then this would be 12 but it's four less than that so it's 11.6. Negative 11.6 but if you look at it as
multiplying it by a factor, what would you have to
multiply by approximately? Let's get the calculator back out. So if I said 52.7 divided by 64.3. Divided by 64.3 is equal to, that's about .82. So times 0.82. So just by looking at this, I can keep going but it looks like for our
give and change in time, my absolute change in the number is not even close to being the same. If this was 15.6, I'd be like okay maybe there's
a little bit of error here. Data that you collect in the real world is never going to be perfect. These are models that try to get us close to describing the data. But over here we keep multiplying it by a factor of roughly .8, roughly .8. Now you might be tempted
to immediately say, okay, well that means that C of t is going to be equal to
our initial temperature, 80 times a common ratio of 0.8 to the number of minutes that passed by. Now this is very tempting and it would be the case
if this was one minute and if this was two minutes but our change in temperature each time is our change in temperature
each time is two minutes so what we really should say is this is one way to think about it is that it takes two minutes to have a 0.8 change or to be multiplied by 0.8. So the real way to describe this would be t over two. Every two minutes when t is zero, we'd be at 80. After two minutes, we would take 80 times 0.8, which is what we got over here. After four minutes, it would be 80 times 0.8 squared. In fact, let's just verify that we feel pretty good about this. So if we had something like this. So t and C of t. So when t is zero, C of t is 80. When t is, well let me just do the
same data that we have here. When t is two, we have 80 times, two over two is one so it's 80 times 0.8, which is pretty close to
what we have over here. When t is four, it would be 80 .0.8 squared which is pretty close to
what we have right over here. I can just calculate it for you. If I have .8 squared times 80, 51.2 Getting pretty close. This is a pretty good approximation. Pretty good model. So I'm liking this model. This isn't exactly one of the choices so how do we manipulate this a little bit? Well, we can remind ourselves that this is the same thing as 80 times 0.8 to the one half and then that to the t power. And what's .8 to the one half? So .8. That's the same thing as
taking the square root of .8 It's roughly .89 So this is approximately 80 times 0.89 to the t power. And if you look at all of these choices, this one is pretty close to this. This model best fits the data, especially of the choices going, this is pretty close to the model that I just thought about. Now another way of doing it that might have been a little bit simpler. I like to do it this way because even if I didn't have choices, we would have gotten to
something reasonable. Another way to do it is to say okay, 80 is our initial state. All of these whether you're talking about exponential or linear models, start with 80 when t is equal to zero but it's clearly not a linear model because we're not changing by even roughly the same amount every time but it looks like every two minutes we're changing by a factor of .8 so we're going to have
an exponential model so you say okay, it will be
one of these two choices. Now this one down here you could rule out because we're not changing
by a factor of 0.8 or 0.81 every minute. We're changing by a factor of 0.81 every two minutes so you could have ruled that one out and then you could have deduced to this right over here and you could have said, look, if I'm changing by a
factor of .9 every minute then that would have been
.81 every two minutes which is pretty close to
what we're seeing here changing by a factor of about .8 or .81 every two minutes. So once again that's why
we like that first choice.