Main content

### Course: Integrated math 2 > Unit 11

Lesson 13: Constructing a line tangent to a circle# Geometric constructions: circle tangent

Sal constructs a line tangent to a circle using compass and straightedge.

## Want to join the conversation?

- Is there anything that relates tan line to tan in trigonometry(17 votes)
- Yes, Kevin, there is a relationship. The length of a line segment that is tangent to a circle AND that connects to a central angle of that circle is the tangent of the central angle.(10 votes)

- Is there an exercise like the one your doing?(6 votes)
- How do you use a compass correctly in real life? Every time I do it, it slides and I can't keep it straight. Any tips?(2 votes)
- I would suggest getting a metal compass and pressing down very hard into the paper where you are drawing. Plastic compasses can slide very easily.(4 votes)

- Something wrong with the order of videos. This should be the first one in the constructing playlist not the last(3 votes)
- Shouldn't the line be on the black dot?(3 votes)
- It is! :D

The line that is coming out of the radius is not the tangent line, it is just a straightedge used to help Sal actually find the tangent, so you can ignore that and look at the line perpendicular to it.

In summary, Sal is just trying to demonstrate how to get the most accurate figure of a tangent line.

I hope this helps. :)(1 vote)

- Why do the subtitles have <i>P</i> when he says P?(3 votes)
- how do you draw two tangents to a circle of radius 4cm so that the angle between them is 45degrees??(1 vote)
- Since tangents are always at 90 degrees to a radius drawn to it, draw any line segment from the center to beyond the line. From any point on the line, you could draw two tangents, So since you want 45 degrees between them, If you divide this in half, you get 22.5 degrees. This would mean you have a right triangle, so find the complement by 90 - 22.5 = 67.5 degrees. So using a protractor, draw an angle with the center as a vertex that is 67.5 degrees, repeat this on the other side of the line you originally drew, and draw a radius using these degrees. This will create the 45 degree angle.(4 votes)

- What are the parametric equations of a circle??(2 votes)
- Parametric equations are a way to show how the progression of a certain scenario, like how a ball travels as it falls from a certain height in a parabola. For the circle specifically, given the equation the circle in standard form, you will have to use trigonometry, which you may or may not have learned.(2 votes)

- explain pi in simple terms(1 vote)
- π is a number, just like 4 or -17 or √2. It is a little more than 3. If you divide the circumference of a circle by the length of its radius, the result will be π, for any circle.(3 votes)

- how do i calculate pi(1 vote)
- There are many ways to compute π, or simple expressions involving π. One of the simplest is to take the series

4-4/3+4/5-4/7+4/9-4/11+4/13-4/15...

This will eventually converge to π, but it does so extremely slowly. You don't even get the approximation 3.14 until after several hundred terms.

Archimedes approximated π by inscribing a circle in a regular 96-sided polygon, inscribing another 96-sided polygon inside the circle, and computing their perimeters with trigonometry. He concluded that π is between the two values he computed, which were 3.1408 and 3.1428.(3 votes)

## Video transcript

You'd be amazed at the things
you can draw or construct if you have a straightedge
and a compass. A straightedge is literally
just something that has a straight edge that allows you to draw straight lines,
like a ruler. A compass is something that allows you
to draw circles centered where you want them
to be centered of different radii. Your typical compass would be
a metal thing that has a pin on one end
and is shaped like an angle and you have a pencil
at the other end. I don't have real physical
rulers and pencils in front of me but I have the virtual equivalent. I can say 'add a compass'
and draw a circle. I can pick where I want to center it
and I can change the radius, and I can draw a straight line segment
and move it around. This is equivalent
to having a straightedge. Using these tools, I want to construct a line going through P
that is tangent to the circle. I'll draw a line that looks
something like this. Remember a tangent line
will touch the circle exactly at one point and that point,
since it's going through b should be point P. Another way to think about a tangent line is that it's going to be perpendicular
to the radius between that point and the center. What I just drew looks pretty good,
but it's not so precise. I don't know if it's exactly
perpendicular to the radius, I don't know if it's touching it
exactly at one point right there. What we're going to do is
use our virtual compass and our virtual straightedge
to do a more precise drawing. Let's do that. The first thing I'm going to do is
set up P as the mid-point of a line where the center of the circle
is one other end of the line. The way I can do that--
let me 'add a compass' here. I'll construct a circle
that has the same radius as my original circle. Now let me move it over
so now it's centered at P. Why is this useful? Now a diameter of this new circle is going to be a segment
that is centered at P. I'm going to have a segment
where P is the mid-point and then the center of my original circle
is going to be one of the end points. Let's do that. I'm going to add a straightedge
and make that one of the end points and I'm going to go through P all the way to the other side
of my new circle. What was the whole point
of me doing that? Now I've made P
the mid-point of a segment so if I can construct
a perpendicular bisector of the segment it will go through P
because P is the mid-point and that thing is going to be
exactly perpendicular to the radius because the original radius
is part of this segment. Let's see how I can do this. What I could do is--
I'm going to draw another circle. I'm going to center it
at the original circle and make it have a different radius. Maybe a radius something like that. Now I'm going to construct another circle
of this larger size but I'm going to center it
at this point over here. I think you'll see quickly
what this will accomplish. So I'll construct another circle
of that same larger radius. Now I'm going to move it
over here. So what's interesting
about the intersection of these two larger circles? This point over here
is equidistant to this end of the segment and to this end of the segment. Remember these two larger circles
have the same radius. So if I'm sitting on both of them I am that distance away from this point
and that distance away from this point. So something that is equidistant
from the two end points of a segment is going to sit
on the perpendicular bisector. So this point is going to sit
on the perpendicular bisector and this point is going to be sitting
on the perpendicular bisector. So now we can draw
a perpendicular bisector. We can go from this point,
the intersection of our two larger circles this point that is equidistant
from the two centers of the large circle, to this point that is equidistant
to the two centers of the large circle. And once again, it is equidistant
to the two centers of the large circle, but those points are also
the end points of this segment. So these two points are on
the perpendicular bisector, you just need two points for a line. So I've just constructed
a perpendicular bisector to P and it's perpendicular to the radius
from the center to P of our original circle. Now, that is going to be a tangent line
because if we go through P and we are exactly perpendicular
to the radius from P to the center then this line we've just constructed
is actually tangent. So, it might seem like a lot of work
to do all of this, I could have started just eyeballing it but when we do it like this
we can feel really good that we're being precise. Imagine if you were trying to do this
on a larger scale, if you were trying to engineer
some very precise instrument, you would want to do it this way. You would want to draw
a very precise drawing, maybe an architectural drawing. This could be an interesting way
to approach it. In times past before folks
had things like computers, this was a thing people actually did.