Main content

## Chemistry library

### Course: Chemistry library > Unit 17

Lesson 4: Spectroscopy- Introduction to spectroscopy
- Electronic transitions and energy
- Worked example: Calculating the maximum wavelength capable of ionization
- Spectrophotometry and the Beer–Lambert Law
- Worked example: Calculating concentration using the Beer–Lambert law
- Spectroscopy and the electromagnetic spectrum
- Electronic transitions in spectroscopy
- Beer–Lambert law

© 2023 Khan AcademyTerms of usePrivacy PolicyCookie Notice

# Worked example: Calculating concentration using the Beer–Lambert law

The Beer–Lambert law relates the absorption of light by a solution to the properties of the solution according to the following equation:

*A*=*εbc*, where*ε*is the molar absorptivity of the absorbing species,*b*is the path length, and*c*is the concentration of the absorbing species. In this video, we'll use the Beer–Lambert law to calculate the concentration of KMnO₄ in an unknown solution. Created by Sal Khan.## Want to join the conversation?

- At1:15he said 'spectrometer', we he soon corrected. I wonder, what is the difference between spectrometer and a spectrophotometer?(16 votes)
- A spectrometer is 'An apparatus used for recording and measuring spectra, esp. as a method of analysis.'. However, a spectrophotometer is ;An apparatus for measuring the intensity of light in a part of the spectrum, esp. as transmitted or emitted by particular substances.;,

Hope that helped!(45 votes)

- What is the purpose of knowing that the solution was measured at 540nm? and was it just coincidence that epsilon = 5.40?(15 votes)
- It is a coincidence, the question is giving you extra information that is not required to find the answer.(12 votes)

- Is mole spelled mole or mol? Sal spells it both ways.(4 votes)
**mole**is the*word*used to describe Avogadro's number of particles.**mol**is the SI*symbol*for the unit. It is*not*an abbreviation.

In SI, you use words with words but symbols with numbers. Thus, you would write "two moles" but "2 mol". Note that symbols are not pluralized : it is incorrect to write "2 mols".(22 votes)

- what if the length was not given? how do i find the molar concentration?(6 votes)
- As long as the length is constant, there will be a linear relationship between concentration and absorbance.

The biggest difference is that without knowing length, you could not solve for epsilon (the E symbol). Therefore, all unknowns would have to have the same length as your original sample.(7 votes)

- How did Sal get liter per cm times mole? also how can you have a liter per mole? And why did Sal do mole per liter at the end instead of liter per mole? I'm really confused.(6 votes)
- You're probably referring to the unit of the epsilon constant. Usually, constants have complicated units in order to make sure that the answer has the correct unit and that the other units are cancelled out.

So according to the Beer-Lambert law,**absorbance**equals**epsilon**times**length of container**(or the length that the light has to travel through to pass through the solution) times**concentration**. The unit of concentration is molarity, which is moles over liter. The unit of length can be centimeters. Absorbance has no unit. If you would try to multiply the units of epsilon, length, and concentration, you should get the unit for absorbance which has no unit. Multiplying**liter per cm times mole**,**cm**, and**mole per liter**would result to all units cancelling out, resulting in no unit.

Sal wanted to find concentration, so he used moles per liter.(6 votes)

- I just realized something. At7:30, Sal says that the length of the vial is 1 centimeter, while the problem says that it is 1.0 centimeter. When he gets to his final answer at12:15, he reports the answer to three significant digits. Since the length of the vial only had 2 significant digits, shouldn't the answer be 0.010, instead of 0.0998? Thanks for the input.(3 votes)
- Yes, Sal should only keep 2 significant figures if the length of the vial is to two significant figures. You are correct in your understanding of this.(10 votes)

- How do you measure the absorbency of a solution without knowing the concentration?(4 votes)
- You just need to know the intensities of the light before and after it passes through the solution.

You first need to find the transmittance of the solution, which is the intensity of the light after it passes through the solution divided by the intensity of the incident light, which is the light before it enters the solution. Then you just get the negative log of the transmittance (use base 10) in order to get the absorbency.

Unless the solution has zero transmittance, then the absorbency should be a positive number. I'm not sure what will be the absorbency of a solution with zero transmittance (probably infinite?)(3 votes)

- Will the absorbance be zero when Molarity is zero? Does pure water absorb some light?(4 votes)
- Yes, water will absorb and scatter some light. So, what we do with a spectrophotometer is use what is called a "blank". The blank will NOT contain the substances whose absorbance we're interested in (most of the time the blank is water plus the indicator). And we just treat the absorbance of this blank as if it were 0. This is known as "zeroing out" or sometimes as "blanking out" the spectrophotometer. The way that you do this depends on how sophisticated the method you're using is.

So, the answer to the question is that we have to declare something to be 0 absorbance. So, normally we would treat a cuvette containing 0 M of the substance we're interested in as having 0 absorbance -- we just tell the spectrophotometer to treat that as 0. But, strictly speaking, no, it is not actually 0 absorbance.(3 votes)

- At4:48, Sal explains that we've proven the Beer-Lambert law to be true because we can see that the relationship of the points is linear. The points in the table, though, do not form a straight line - calculating the slope by using different pairs of the coordinates yields slightly different slopes for each pair of coordinates, and if the relationship was linear, based on the first set of coordinates, the last coordinate would be (.15, .81) rather than .(.15,.84). So is it the case that the Beer-Lambert relationship is "almost' linear or is the discrepancy due to imperfection in measuring instruments. Thanks.

James Knight(2 votes)- Beer-Lambert is only approximately true. I wouldn't trust it for any absorbance greater than 0.400 myself. (My research required much better accuracy and precision than I student would need, so you might get away with a little higher.)

Depending on many circumstances, the curve of absorbance vs. concentration begins to flatten out above 0.3 absorbance.

The way that we accommodate for this is to analyze standards of known concentrations, and only use those that are within what is called "the linear range" -- in other words where Beer-Lambert applies.(3 votes)

- So, each time the absorbance in the graph will increase by depending of the concentration of the solution?(2 votes)
- Always, because the greater the concentration, the more "stuff" lights needs to pass through and therefore less light will pass.(2 votes)

## Video transcript

- [Instructor] So I have a question here from the Kotz, Treichel,
and Townsend Chemistry and Chemical Reactivity book, and I got their permission to do this. And it says a solution
of potassium permanganate has an absorbance of 0.539 when measured at 540 nanometers in a one centimeter cell. What is the concentration of
the potassium permanganate? Prior to determining the
absorbance for the unknown solution the following calibration
data were collected for the spectrophotometer. So the way that we would tackle this is we know that there
is a linear relationship between absorbance and concentration. We could describe it something like this, that absorbance is going to be equal to sum slope times are concentration. And you could say sum y-intercept, if we're a purist about it, then the y intercept should be zero because at a zero concentration, you should have a zero absorbance. But the way that chemists
would typically do it, is that they would put
these points into a computer and then a computer do
a linear aggression. You could also do that by hand but that's a little bit out
of the scope of this video. And I did that, I went to Desmos and I typed in the numbers that they gave. And this is what I got, so I just typed in these numbers and then it fit a linear
regression line to it and it got these parameters,
m is equal to this and b is equal to this. Now we could say significant figures it seems like the small
significant figures here we have have our three, but we could just view the m and the b as intermediate numbers
in our calculations. What I'm going to do is
I'm gonna use m and b, and then my final I'll answer I'm going to round to
three significant figures. So what this tells us, is that absorbance is going to be 5.65333 times our concentration minus 0.0086. And now they've given us what A is. Let me get rid of all of this stuff here. They told us that our absorbance is 0.539, so we know that 0.539 is equal
to 5.65333C minus 0.0086. And then if you wanna solve for C, let's see, we could add
this to both sides first. So you get 0.539 plus
0.0086 is equal to 5.65333C, and then divide both sides by this, and you would get C is equal to, is going to be approximately
equal to, be a little careful all of these would really be approximate. C is gonna be equal to 0.539
plus 0.0086 divided by 5.65333. And of course we want to round
to three significant figures. All right, 0.539 plus
0.0086 is equal to that, divided by 5.65333 is equal to this, so if we go three significant figures this is going to be 0.0969. So I would write the concentration is approximately 0.0969 Molar.