Health and medicine
Why doesn't the heart rip?
Understand LaPlace's law to see the effect that pressure, radius, and wall thickness each have on the "wall stress" in the left ventricle. Rishi is a pediatric infectious disease physician and works at Khan Academy. Created by Rishi Desai.
Want to join the conversation?
- To summarize, it's because the bond strength of the desmasomes and the tangle of the muscle cells are stronger than the wall stress? Volume (radius) in the ventrical doesn't impact the stress much so it would be during compression that you could have a rip. Is the strength of the heart wall just very high relative to the systole pressure and that's why it doesn't rip?(11 votes)
- I think the real take home point of the equation is that just a little bit more wall thickness decreases wall stress a LOT.
Epidermis cells also have desmosomes (and tight junctions, which may be less stress-resistant), but they're not amazingly strong.(10 votes)
- Can desmosomes rip(snap/tear etc.)?(5 votes)
- Desmosomes can rupture under mechanical stress. One example is when the skin is put under a lot of stress in a part of the body such as the knuckle. Rupture of the desmosomes can lead to fissuring of the skin.(6 votes)
- can desmosomes (sp?) cease to function due to wearing out or an outside disease process?(2 votes)
- I'm not aware of them wearing out but certainly can be affected by disease processes. A person can be born with a problem with the desmosomes that can affect the heart (ARVD) or the skin (problems with blistering or hair problems). There are also some problems that can develop when the body attacks the desmosomes and causes easy blistering.(6 votes)
- What happens if the heart is punctured will it heal like normal skin ?(2 votes)
- If the heart is punctured, blood will escape the circulatory system and fill the pericardium or the chest cavity. Such a wound will require surgery to close it.
The heart tissue itself (myocardium) heals fairly slowly, and a puncture is unlikely to heal itself.(5 votes)
- When do we use radius of the outside versus radius to the inside?(2 votes)
- The radius is always measured inside the circle.(3 votes)
- how come you can be born with a hole, isnt that like a rip in your heart(1 vote)
- Short answer: depends on where the hole is. Most atrial septal defects, like the PFO mentioned above, can be asymptomatic for a long time. Ventricular septal defects, or large holes anywhere else, for that matter, can lead to cyanosis (blue skin) and poor cardiac output. These can be life threatening and are usually corrected at birth or within the first few weeks of birth.(3 votes)
- I don't really understand why the heart WOULD rip, I mean isn't it like any other tissue that won't rip unless it's injured?(2 votes)
- Is there any relationship between volume and pressure though? You've mentioned that pressure has a bigger influence on the wall stress, but isn't that same pressure generated from the volume of blood in the chamber?(2 votes)
- Makes sense that the LV is the thickest of the chambers of the heart. A higher thickness means more desmosomes, which means an increased ability to resist the high pressure that the LV is known for.(2 votes)
- Does that apply to the any hollow organ other than the heart?(1 vote)
So we're going to talk about the left ventricle. I'm going to draw out the left ventricle here. And I'm going to draw out the rest of the heart, as well, but I'm just going to kind of leave dashes here just to make sure that we kind of focus in on just that one chamber, the left ventricle. And this is, of course, next to the right ventricle. And above both of them, you know you have the two atria. Right? These are the chambers of the heart that are going to kind of hold onto the blood until it's time to refill the ventricles. This is our right atrium and our left atrium. Now a question that came up to me, and might come up to you, is why in the world does the left ventricle never have a rip or tear? I mean, if I look at my jeans or anything else, you always get these kind of rips and tears over time. And why is it that you don't get these tears in the left ventricle? I mean it would be disastrous, of course, because the blood would start gushing out of the left ventricle, but what prevents that from happening? And also what are the stresses on the left ventricle? What does it have to deal with exactly? So to think about this, I actually wanted to split it up into two categories. You've got diastole, right? And you've got systole. And diastole, of course, is when you have refilling of the heart and systole is during kind of the squeezing of the heart. And when I say the heart, I should really be more specific. I mean the squeezing of the left ventricle. Because now I'm going to talk just in the perspective of the left ventricle. Now diastole, what is happening there? Well, blood is really refilling that left ventricle and so the volume of that chamber is going up, up, up. And during systole, pressure is going up, up, up. So these are the two major issues, right? Now of course you have volume in systole and, of course, you have some pressure in diastole. That's not what I'm saying. But what I am trying to get to is the idea that the major issue in diastole is the fact that you've got a full heart. Especially by the end of diastole, and you should have a full left ventricle, the fullest it's going to be. And in systole, the highest pressures that the left ventricle is going to see. So keeping this idea in mind, let's actually now go back about 200 years to someone who thought about a very similar situation around kind of the stress of the wall, and what pressure and volume will do to that. So this guy, I'm going to draw up his picture, bring it up. This guy is a French mathematician. And his name was Laplace. And we actually still honor him by kind of talking about his formulas today. And Laplace was a brilliant mathematician. He actually gave a lot of thought to shapes. And the shape that we're going to be kind of focusing on today is the sphere, or a ball. So you can just think of a ball like a baseball. I'm drawing it kind of orange like a basketball, I suppose. And this ball is essentially a hollow sphere, right? And I'm going to draw on the side-- actually, I'm going to write that sphere here-- I'm going to draw on the side a left ventricle. Or kind of my image of a left ventricle, right? Something like that. It actually starts looking quite similar to this sphere. So the idea is that he, Laplace, thought about spheres, but a lot of the ideas he put forward actually apply beautifully to the left ventricle, as well. So you've got something like this, where you can see the obvious similarities. Now Laplace thought about this in terms of what would happen if you actually cut away part of that sphere? And let's say you could actually now kind of look down at the cross section of it. Something like that. So he actually thought about it in those terms. And, of course, I said that this is a hollow ball, so you've got to fill it in. You've got something like an inner circle I suppose. Like that, right? In fact, let me draw it on the side here so you can make it really nice and easy to see. I don't want you to have to try to figure out what it is I'm drawing. Something like that, right? This is our cross section of the ball or the sphere. And you could do the exact same thing with the left ventricle. Now the first thing that Laplace thought about was volume. He knew that volume is going to put some sort of stress on the wall. And volume, we know equals-- you can actually write the formula out-- 4/3 pi r cubed. So if you actually take away some of these numbers, 4/3 and pi, I mean these are just numbers. Right? You can get rid of those. Then you could say, well, there's a relationship or a proportion between volume and radius. And you can actually write proportion as this symbol, right? That means proportional to. And so you can take the cubed root of both sides. You could just say, OK, what's the cubed root of this side? And the cubed root of this side? And you could say, well, that means that radius-- because that cancels-- radius is proportional to the cubed root of v, or volume. And on our two pictures, let me just write it on this picture, actually, just to be clear. This would be our radius. So this is our radius. Now a second point, I'm just going to first label our picture, and then you'll see how it all kind of comes together, is pressure. And pressure is a little simpler to imagine. We know that that's just a force divided by an area. And here I can draw little blue arrows to signify the pressure on the walls of this left ventricle. This is our pressure. I say left ventricle or sphere. Kind of interchangeably, I guess, right? At the moment. And third is the wall itself. Right? The wall thickness. How thick is the wall? And that's obviously going to affect how much stress the wall feels. So wall thickness would be kind of this quantity. And I'll write w for wall thickness. Now putting it all together, Laplace came up with this. He said, well, the stress of the wall, we'll call it wall stress, is equal to some of these other factors. He said, it's equal to pressure-- let me write that first-- pressure times the radius divided by 2 times the wall thickness. 2 times w. So that was the relationship. And if you think about it, you get some interesting kind of ideas from this. You say, well, OK, radius, what is that? Well, radius is like a length, right? You're going to measure that out, like centimeters or millimeters. And wall thickness is also a length. Right? So you've got very similar. You've got millimeters or centimeters. And we just got through saying pressure is just force divided by an area. So what units are wall stress? Well, length cancels length. So all you're left with is force over area. So really, wall stress-- and this is pretty cool-- is in units of pressure. So it's kind of a pressure, isn't it? But that might make you feel kind of puzzled. Because you think, well, wait a second. What is wall stress exactly? You might have thought that wall stress was the stress on a wall. Maybe it was something like this. But actually, it's not, right? Because that would then just be the p, the pressure that we had in the first place. So then what is wall stress? What would it look like? Well, wall stress you can imagine as this. The stress is the-- we said it's a pressure. Think of the pressure, the pulling pressure. That's kind of how I think of it. Pulling pressure. Literally, the pressure that's pulling apart the wall. So, in our first question, when I opened up the video, I said, what is keeping our wall from just having rips and tears? And the wall stress is literally the force-- or I shouldn't say force-- the force divided by area, the pressure that's going to cause those rips and tears. So you can see that, in a way, we should have some rips and tears in our left ventricular wall. But we don't. Why don't we? So these, in that little white box, I'm going to draw for you what's inside there. And you know it's going to be little heart cells. Right? So little heart cells are lining this wall. And you've got thousands of them, of course, right? Thousands of little heart cells going every which way. And you've got them crossing and going over and under each other. Something like this. So what happens is that you literally have thousands of heart cells and they're attached to each other. And these little attachments are-- I'm going to draw on white-- called desmosomes. So desmosomes are one of the reasons why your heart doesn't just rip apart. You've got these tiny little desmosomes and their job is to keep everything kind of tidy and tucked. They want to keep the heart cells attached. And that means if they're going to be attached that they're not getting ripped apart. So these white little arrows are literally counteracting those purple pulling pressure arrows. So this is how you can think about wall stress and why it is that our heart doesn't just rip apart. Lastly, I want to point out that the pressure is actually going to be in our equation, but we don't really have volume in our equation, we have radius. And the relationship is a cubed root, right? So if you have a cubed root here, but pressure is direct, then that means that between the two of them, volume versus pressure, pressure has a bigger influence on wall stress than volume does. So that's one interesting point. Another interesting point is that wall thickness, which is right here, makes perfect sense. Because if you have more and more of these heart cells, that means you have more and more desmosomes that are going to counteract the effects of pressure and radius in this equation.