Main content

### Course: Class 11 Physics (India) > Unit 4

Lesson 4: Limit basics# Limits by direct substitution

Sal explains how you can easily find limits of functions at points where the functions are continuous: simply plug in the x-value into the function! Later we will learn how to find limits even when the function isn't continuous.

## Want to join the conversation?

- I think Sal may have left something out. Correct me if I'm wrong, but on certain occasions, the entire function does not have to be continuous. If it is continuous at the value, a, then it should be fine to use direct substitution even though the function might be undefined elsewhere. This is because it isn't undefined at a so your output will be defined. Also, since your function is continuous at a, the limit there will exist meaning that you won't have to worry about jump discontinuities. Please tell me if this all seems reasonable.(91 votes)
- You are essentially correct. Sal should have said that the function only has to be continuous within the interval you are concerned with.

I hope this helps!(81 votes)

- how would we know if the problem is to be solved by direct substitution method? or if the function given is continuous? without drawing its graph(16 votes)
- How would you know? In some cases it is easier than in others; here, we see that the function is a parabola so it is somewhat clear that it has to be continuous.
**In general, all simple polynomials such as a parabola are continuous**.*However*, say you have a quotient, such as f(x) = x^2/x. Since division by zero is undefined, f(0) would be undefined in this function.

So, you have to watch out for things such as division by zero, which will frequently pop up when finding limits.(34 votes)

- lim h(x) as x ->6 for h(x) =square root of (5x+6) should be 6 or -6 or both?(5 votes)
- y=√x is a function that returns only positive values. So in this context, we are only looking at the principal root, and the limit is positive 6.

Limits are unique: they cannot have multiple values. So "both" would never be an option.(12 votes)

- At1:14, what's the difference between f(x) as x->a, and f(a)?(4 votes)
- One is a limit, the other is an evaluation of the function. If the function is continuous and defined at (in your example), a, then they're equivalent. But you can get some very interesting results if the function is not continuous or not defined.

The limit is basically saying what the function*seems*to be going to as x gets closer to closer to a, but the function may not be defined at that point.(13 votes)

- Is the limit zero or none since it is continuous?(3 votes)
- The limit is 0 as Sal has demonstrated in the video.(8 votes)

- Ok so basically if a function, say f(x), is continuous at x=c, then the lim x-->c = f(x)? Is this why you can find limits of continuous functions by direct substitution?(3 votes)
- Yes, the limit as x->c of f(x) is f(c). This property is equivalent to the epsilon-delta definition of continuity, and it's why we can use direct substitution for most familiar functions.(4 votes)

- Can a limit be a fraction?(3 votes)
- yes a limit can be a fraction. For example if I asked you to find the limit as X approaches 2 for the functions (1/X), when you use substitution to find the limit you find that the number it approaches is .5 or 1/2.(4 votes)

- I thought it like this : Lim x-> a f(x) = f(a) if f(x) is continuous at x=a, not vice versa? Can someone tell me why?(2 votes)
- That statement holds in both directions. A function is continuous at a point a
**if and only if**the limit value equals the function value at a. Since the two statements are equivalent, this can be used as a definition of continuity.(4 votes)

- By Sal and almost all discussion about relation between continuity and limit: it always says that as long as the function is continuous, there is a limit.

i am wondering if there is a case that the function is continuous but the limit does not exist.

at this page:

https://math.libretexts.org/Bookshelves/Calculus/Book%3A_Active_Calculus_(Boelkins_et_al)/1%3A_Understanding_the_Derivative/1.7%3A_Limits%2C_Continuity%2C_and_Differentiability

in figure 1.7.2, the right graph, at point x=1. the left hand limit is 2. but the as x approaches 1 from the right, the function keeps oscillating, so the limit does not exist.

so the function is continuous by the graph, but limit does not exist.

am I wrong? or am I give some wrong example?(3 votes)- Interesting question!

By definition, a function f(x) is continuous at x=x_0 if and only if for every epsilon>0, there exists delta>0 such that whenever x is within delta of x_0, f(x) is always within epsilon of f(x_0).

Though the function might look continuous at x=1, it is really discontinuous at x=1 due to the oscillatory behavior. For example, if we choose epsilon = 1/2, there does not exist delta>0 such that whenever x is within delta of 1, f(x) is always within epsilon of f(1). This is because there are values of x arbitrarily close to 1 (from the right) such that f(x) differs from f(1) by as much as 1 unit.(1 vote)

- In the statement towards the end in yellow, maybe I am overthinking it but shouldn't the cause be f is cont. at x = a and the effect be lim x---> a f(x) = F(a), instead of vice versa? Thanks.(1 vote)
- Pretty much why Sal said "iff" (if and only if) and not just if. "iff" implies that the statement works both ways. So, there is no set cause and effect (that is, for two statements A and B, A iff B means "A is true if B is true, and B is true if A is true")(3 votes)

## Video transcript

- [Voiceover] So let's see
if we can find the limit as X approaches negative
one of six X squared plus five X minus one. Now the first thing that
might jump out at you is this right over here,
this expression could be used to define the graph of a parabola. And when you think about
this, I'm not doing a rigorous proof here, parabola would look something like this and this would be an upward opening parabola,
look something like this. It is a, this graph,
visually, is continuous, you don't see any jumps or gaps in it. And in general, a quadratic like this is going to be defined for all values of X for all real numbers, and
it's going to be continuous, oh, for all real numbers. And so if something is
continuous for all real numbers, well then the limit as X
approaches some real number is going to be the same
thing, it's just a value within the expression at that real number. So what am I saying, I'm just
gonna say it another way, we know that some function is continuous, is continuous at some
X value, at X equals A if and only if, I'll
write that as iff, or iff, if and only if the limit as X approaches A of F of X is equal to F of, is equal to F of A. So I didn't do a rigorous proof here, but just, it's conceptually not a big jump to say, okay, well this
is, this is just a standard quadratic right over here, it's defined for all real numbers, and in fact it's continuous
for all real numbers. And so we know that this expression, it could define a continuous function, so that means that the
limit as X approaches A for this expression is just the same thing as evaluating this expression at A. And in this case, our A is negative one. So all I have to to is
evaluate this at negative one. This is going to be six
times negative one squared plus five times negative one minus one. So that's just one, this is negative five, so it's six minus five minus one, which is equal to zero. And we are done.