Main content

### Course: Mechanics (Essentials) - Class 11th > Unit 7

Lesson 2: Why holding a heavy weight above your head isn't doing any work!- Work and the work-energy principle
- What is kinetic energy?
- Using the kinetic energy equation
- Work example problems
- Calculating change in kinetic energy from a force
- Velocity and mass from force vs. position graphs
- Example: Calculating work and KE from graphs

© 2024 Khan AcademyTerms of usePrivacy PolicyCookie Notice

# Work example problems

David goes through some example problems on the concept of work. By reviewing these, you'll have a better knowledge of how to calculate work done by individual forces on an object in motion. You'll also understand the formula definition of work and how forces like tension, friction, and gravity play a role, and be able to apply the work-energy principle to determine an object's final speed. Created by David SantoPietro.

## Want to join the conversation?

- At4:33he says no net work due to no change in kinetic energy. Is there not a change in potential energy that would account for work being done?(74 votes)
- If the trashcan's velocity is constant, that means it has no net acceleration. If it has no acceleration, there is no net force on the object, since F=ma=4kg(0)=0. If there is no net force, then no net work is being done on the object, since W=fd=0(2m). However, you are accelerating the trashcan, applying a force to it, and doing work on it when you lift it, it is just that all of your work is being negated by gravity in this example of constant velocity. Hope this helps!(8 votes)

- At4:06, I don't understand why the force lifting the trash can up is 39.2N. If it's 39.2N up and 39.2N down, would the forces balance on both sides and the trash can would not be lifted up? Doesn't the upward force have to be greater in some way for it to move in that direction?(53 votes)
- Yes, you need slightly more than 39.2N to trigger the initial acceleration.(7 votes)

- He uses kinetic friction in the video but how would it be effected if he also had Static Friction?(12 votes)
- static friction applies when there is no movement. Hence, no displacement = no work done.(38 votes)

- How is there no change in KE in the example, at the very end of the video (4:44). Initially velocity was zero and then after a 2 mt displacement, it had some velocity, so there has to be a change in KE?(5 votes)
- Yeah, this is a bad example. He needed to make one of the following conditions:

1) the can starts from rest and ends at rest. In that case you put in some extra work to accelerate the can but then you get back the same amount when you decelerate it, so the total work is just F*d

or

2) the can somehow already had upward velocity and all we did was maintain that upward velocity to get it to the new height. That's sort of what he implied when he said the can had constant velocity, but it doesn't make practical sense because the can started on the ground.

A better example might to put the can in an elevator. The elevator starts at the first floor and stops at the 4th floor. How much work was done on it between floors 2 and 3 when it moved at constant velocity? That's f*d.(22 votes)

- But wait. I know that the net force needs to be zero for avoiding any acceleration, but if there was no budging force in the beginning, why would the trashcan even go in the air with a constant velocity? Both forces are equal, so it'd rather stay on the ground.

I do understand that Fn = 0 makes sense when it's already in a velocity, but how does it make sense when it was at rest and went into a constant motion just because a force equal to gravity began pushing it from below?(12 votes)- Well we assume the body is already in motion.So we ignore the fact that an initial force was applied which was larger than gravitational force and whose acceleration was used to attain the constant velocity.(7 votes)

- 5:31will a very less force just greater than zero can lift the block because normal from the ground will be balancing mg and it could move up with a little force(4 votes)
- Good question. The answer is no. It might seem that the laws of physics say yes, because if normal is equal and opposite to mg, then adding a small upward force will result in a net upward force. So what happens? Well, the normal force is a funny kind of force, which you might call a "reactive" force -- it only pushes exactly hard enough to keep the object from pushing through the surface,
*but no harder*. So if a 100N block is sitting on a horizontal table, the normal force will be 100N, up. If you pull upwards with a force of 2N, the normal force instantaneously (well, almost) drops to 98N, so that the net force is still zero, and the block does not move. If you increase your upward pull to 99N, the normal force will drop to 1N. This should agree with common sense and your experience -- if you want to lift a 100N object, YOU have to pull upward with 100N of force! (note: you mention the time5:31in your question, but this video is only4:49in total length!)(16 votes)

- At1:50, how can the work done be a negative value when work is a scalar quantity? I understand that cosine of 180 is -1, but is the negative value still relevant?(5 votes)
- Yes. It means that the force and displacement vectors are opposite. So, lifting a crate up means gravity is doing negative work and you do positive work. If you lower a crate, the opposite is true.(8 votes)

- I feel like we just jumped through a lot of stuff(8 votes)
- I wonder if they might have changed this lesson over the years because they talk as if this is a review when this is all completely new info following along the HS physics course.(1 vote)

- At2:15why is the angle listed at 90 degrees and not 270 degrees? I'm watching all of the Khan Academy videos on physics, and in an earlier physics video on vectors, they said that vector angles are measured in a counter clockwise direction starting from the east.(6 votes)
- It does not matter. There certainly is no law of physics that says angles must be measured that way.(4 votes)

- At4:42, what if the velocity was not constant when it moved 2m up (but even after 2m it was still moving) what would be the work then?(4 votes)
- Well then the work would be calculated like the example given before using KE= 1/2 (mv^2). We would need to know the velocity to calculate the KE (correct me if I'm wrong)(2 votes)

## Video transcript

I'm going to show you
some examples of how to solve problems
involving work. Imagine a 4 kilogram trashcan. The trashcan is disgusting. So someone ties a
string to it and pulls on the string with a
force of 50 newtons. The force of kinetic friction
on the trashcan while it slides is 30 newtons. The trash can slides
across the ground for a distance of 10 meters. Let's try to find the work done
by each force on the trash can as it slides across the ground. To find the work
done by each force, we should recall the
formula definition of work. Work equals Fd
cosine theta, where theta is the angle
between the force doing the work and the direction
the trashcan is moving. There are four forces
involved here-- tension, the normal force, the
gravitational force, and the force of
kinetic friction. In finding the work done
for all of these forces, the displacement is
going to be 10 meters. But the value of the
force and the angle between that force
and the displacement is going to differ for
each of the forces. For instance, to find the work
done by the force of tension, we'll plug in the size of the
tension, which is 50 newtons. The displacement is 10 meters. And since the tension
force is pointed in the same direction
as the displacement, the angle between the force of
tension and the displacement is 0 degrees. And since cosine of 0 is 1, the
work done by the tension force is 500 joules. To find the work
done by friction, we'll plug in the size
of the force of friction, which is 30 newtons. The displacement
is still 10 meters. And since the force
of friction points in the opposite direction
as the displacement, the angle between the force of
friction and the displacement is 180 degrees. Since cosine of
180 is negative 1, the work done by the
force of friction is negative 300 joules. Now let's figure
out the work done by the gravitational force. The force of gravity is mg. So the force of
gravity is 4 kilograms times 9.8 meters per second
squared, which is 39.2 newtons. The displacement
is again 10 meters. But the angle between
the gravitational force and the direction
of the displacement is 90 degrees in this case. And since cosine of 90 is
0, the gravitational force does no work on this trashcan. Similarly, if we were
to find the work done by the normal force, the
angle between the direction of the displacement and the
normal force is 90 degrees. So the normal force also
does no work on the trashcan. This makes sense
because forces that are perpendicular to
the motion can never do any work on that object. So that's how you can find the
work done by individual forces. And if we wanted to know the
net work done on this trashcan, we could just add up the work
done by each individual force. So the net work is
going to be 200 joules. Now that we know the net
work done on the trashcan, we can use the
work-energy principle to figure out the
speed of the trashcan after it's slid the 10 meters. The work-energy principle
says that the net work done on an object is
equal to the change in kinetic energy
of that object. So 200 joules is going
to equal the difference in kinetic energy. If we assume the
trashcan started at rest, which seems reasonable,
the initial velocity is 0. So we can solve for the final
speed of the trashcan, which comes out to be 10
meters per second. This time, let's say
you take the trashcan and lift it upwards
with a constant velocity for a distance of 2 meters. In order to lift the trashcan
up with a constant velocity, you need to push with a
force equal to the weight of the trashcan, which means
you have to push upwards with a force of 39.2 newtons. So to find the work done by
the force that you exert, the force is going
to be 39.2 newtons. The displacement is
going to be 2 meters. And the angle between the
force and the displacement is going to be 0 degrees because
the direction of the force that you exert is in the same
direction as the displacement of the trashcan. So the work that you've done
in lifting up this 4 kilogram trashcan is 78.4 joules. To find the work done
by the force of gravity, we can use the force of gravity,
which is again 39.2 newtons. The displacement
is again 2 meters. But the angle
between the direction of the displacement and
the gravitational force is 180 degrees because
the displacement points up and the gravitational
force points down. So the work done by
the gravitational force is negative 78.4
joules, which means the net work done on
the trashcan is 0. And that makes sense. Because since the trashcan moved
upwards with constant velocity, there was no change in the
kinetic energy of this object.