Main content

## MCAT

### Course: MCAT > Unit 9

Lesson 1: Acid/base equilibria- Acid/base questions
- Acid-base definitions
- Chemistry of buffers and buffers in our blood
- Ka and acid strength
- Autoionization of water
- Definition of pH
- Strong acid solutions
- Strong base solutions
- Weak acid equilibrium
- Weak base equilibrium
- Relationship between Ka and Kb
- Acid–base properties of salts
- pH of salt solutions
- Common ion effect and buffers
- Buffer solutions
- Buffer solution pH calculations

© 2023 Khan AcademyTerms of usePrivacy PolicyCookie Notice

# pH of salt solutions

The pH of a salt solution is determined by the relative strength of its conjugated acid-base pair. Salts can be acidic, neutral, or basic. Salts that form from a strong acid and a weak base are acid salts, like ammonium chloride (NH4Cl). Salts that form from a weak acid and a strong base are basic salts, like sodium bicarbonate (NaHCO3).

## Want to join the conversation?

- We consider X << 0.25 or what ever the value given in a question (assumptions). Due to this we take x as 0. Then why don't we take x square as zero?(18 votes)
- When we have 0.25 - x, we may assume that x is negligible in comparison to the 0.25. We are not saying that x = 0.

If x = 0.001, then 0.25 - x = 0.25 (within allowable significant figures). This is equivalent to saying that x might as well be zero.

But x² by itself still has a value. If x = 0.001, then x² = 0.000 001. This number is not being compared with 0.25. If anything, it is being compared with zero. No matter how small it is, it is infinitely larger than zero, so we cannot ignore it.(36 votes)

- I thought the acetate was a strong conjugate base( because acetic acid is a weak acid), I used the to the strong base way of calculate the pH. Why did Jay use the weak base formula?(20 votes)
- I think the 'strong base if weak conjugate acid' argument only really works if the conjugate acid is less acidic than water. In case of acetate ion, its conjugate acid CH3COOH, while definitely a relatively 'weak' acid', isn't weaker than water, so its conjugate base is a weak base.

You can calculate the Kb of acetate ion from Kw = Ka*Kb to check this out. It is less compared to, say, ammonia, which is a known weak base.(22 votes)

- at8:48why did you not include Chlorine into the equation?(15 votes)
- See the chloride ion as the conjugate base of HCl, which is a very strong acid. Since a very strong acid has a very weak conjugate base, the chloride ion don't really take protons from water, thus it does not affect the pH of the solution, we thus do not include it into the equation. You may also refer to the previous video. This is similar to the reason why the chloride ion (and the sodium ion) in NaCl does not affect the pH of the solution.(16 votes)

- At8:19; how do you know which ions are going to react appreciably in water and thus use it in the equation?(7 votes)
- This is something you learn with experience, although it helps if you can remember the names of the common strong acids (HCl, HBr, Hi, H2SO4, HNO3, HClO4) and strong bases (hydroxides of Group 1 and 2 elements). There's a very good chance that if you have an acid or base that is not on this list, then it is a weak acid or base - this is particularly the case if it contains carbon (eg, CH3COOH). The conjugate bases of strong acids, and the conjugate acids of strong bases, do not react appreciably with water, whereas this is not the case with weak acids and bases.

In terms of the example you query, Cl- is the conjugate base of HCl. HCl is a very strong acid, which means that Cl- will be a very weak base. As a very weak base it will therefore not steal a proton from water to reform HCl.(13 votes)

- Why doesn't Na react with water? I thought H2O is polar and attracts Na?(4 votes)
- Metals like potassium and
**Sodium**react violently with**cold water**. In case of sodium and potassium, the reaction is so violent and exothermic.**Sodium**as an element is looking to donate one of its electrons to achieve a stable outer electron configuration. As an**ion**, sodium doesn't want to gain or lose any more electrons, so it isn't going to react with anything, including water.(6 votes)

- At12:20, how can you always assume that the x is negligible? In what cases is it not? How can you make sure beforehand that you can just remove the x from the denominator like that?(3 votes)
- One "rule of thumb" that I learned is if your x ends up being larger than 5% of your starting value you need to solve the quadratic. Let's say that you started with an initial concentration of 5*10-8 M NH4Cl and you solve this problem using the method shown.

You will find x = 5.27*10-9

x is (5.27*10-9/5*10-8)*100% = 10.5% of starting value

If you solve the quadratic equation, you'll find x = 5.00*10-9

So, does this matter? Most of the time it doesn't BUT someday it might. So, in practice, it's worth checking if x is really negligible.(6 votes)

- What is the guarantee that CH3COONa will completely dissociate completely? I mean its also possible that only 0.15M dissociates. In that case answers would change. So are we to assume it dissociates completely??(4 votes)
- At this stage of your learning, you are to assume that an ionic compound dissociates completely.

And CH₃COO⁻Na⁺ is an ionic compound, so you assume that it dissociates completely.(4 votes)

- Do I create an ICE table on the MCAT or is there a more simple method to solve these problems? I'm specifically referring to the first example of the video. A lot of these examples require calculators and complex methods of solving.. help!(4 votes)
- In theory, you could figure the concentrations in your head and then calculate it, but it's much easier to use an ICE table. Calculators are usually required for these sorts of problems.(0 votes)

- He assumes that the initial concentration of NH4+ is equal to the total concentration of NH4Cl in solution. Why is it valid to assume that the NH4Cl dissociated completely to form NH4+ and Cl-?(3 votes)
- So if x is not smaller than 0.25, would you have to use the quadratic formula to solve for x?(2 votes)
- Usually, if x is not smaller than 5 % of the initial concentration, you have to use the quadratic formula.(2 votes)

## Video transcript

- Our goal is to find the pH
of different salt solutions, and we'll start with this
solution of sodium acetate. So in solution, we're gonna
have sodium ions, Na+, and acetate anions, CH3COO-, and the sodium cations aren't
going to react with water, but the acetate anions will. So the acetate anion is the
conjugate base to acetic acid. So, the acetate anion is
going to react with water, and it's gonna function as a base: it's going to take a proton from water. So if you add an H+ to
CH3COO-, you get CH3COOH. And if you take a proton away from water, if you take an H+ away from H2O, you get OH-, or the hydroxide ion. Alright, so let's go ahead and write our initial concentrations here. So our goal is to calculate
the pH of our solution. And we're starting with .25 molar concentration of sodium acetate. And so that's the same
concentration of our acetate anion, here, so we're gonna write: 0.25 molar, for the initial concentration of the acetate anion. And if we pretend like
nothing has reacted, we should have a zero concentration for both of our products, right? So a zero concentration
for our two products. Next, we think about the change. So CH3COO-, the acetate
anion, when it reacts, is gonna turn into:
CH3COOH, or acetic acid. So whatever concentration we
lose for the acetate anion, we gain for acetic acid. So if we make the concentration of the acetate anion, X, that reacts... Alright, so, X reacts. If X concentration reacts,
we're going to lose X, and we're going to gain
X over here, alright? And it's the same thing for hydroxide. We'll be gaining X, a
concentration for the hydroxide. So, at equilibrium, the
concentration of acetate would be .25 - X, so
we're assuming everything comes through equilibrium, here. The concentration of
acetic acid would be X. The concentration of
hydroxide would also be X. Alright, next we write our
equilibrium expression, and since this is acetate
functioning as a base, we would write "Kb" here;
so we write: Kb is equal to concentration of our products over concentration of our reactives. So we have the concentration
of CH3COOH times the concentration of hydroxide, so times the concentration of OH- this is all: over the
concentration of our reactants, and once again, we ignore water. So we have only the concentration of acetate to worry about here. So we put in the concentration of acetate. Alright, so... Let's think about the concentration of acetic acid at equilibrium. Alright, so at equilibrium,
the concentration is X. And so I go over here and put "X", and then for hydroxide,
it's the same thing, right? The concentration of hydroxide
at equilibrium is also X, and so I put "X" in over here. And then, for the concentration of acetate at equilibrium, concentration of acetate is zero point two five minus X. So, 0.25 - X. Next, we need to think about
the Kb value for this reaction, and you will probably not be
able to find this in any table, but you can find the Ka for acetic acid. So, acetic acid and acetate
is a conjugate acid-base pair, and the Ka value for acetic acid is easily found in most text books, and the Ka value is equal to 1.8 x 10-5. And our goal is to find the Kb. What is the Kb for the conjugate base? Now, we know that for a
conjugate acid-base pair, Ka times Kb is equal to Kw, the ionization constant for water. So we can go ahead and plug in: 1.8 x 10-5 x Kb is equal to, we know this value is 1.0 x 10-14. So we just need to solve for Kb. So we can get out the calculator here and take 1.0 x 1014,
and then we divide by: 1.8 x 105; so we get: 5.6 x 10-10. So let's get some more space
down here and let's write that. So Kb is equal to 5.6 x 10-10. And this is equal to X squared, equal to X2 over .25 - X. Next, to make the math easier, we're going to assume
that the concentration, X, is much, much smaller than
.25, and if that's the case, if this is an extremely small number, we can just pretend like
it's pretty close to zero, and so .25 - X is pretty
much the same thing as 0.25. So let's make that assumption, once again, to make our life easier. So this is 5.6 x 10-10 = X2 over 0.25 So now we need to solve for X. So we have: 5.6 x 10-10 and
we're going to multiply that, we're going to multiply that, by .25... And so we get 1.4 x 10-10. So we now need to take the
square root of that number and we get: X is equal to, this gives us: X is equal to 1.2 times
10 to the negative five. So let's go ahead and write that here. So: X = 1.2 x 10-5 Alright, what did X represent? We have all these
calculations written here, we might have forgotten what X represents. X represents the concentration
of hydroxide ions. So X is equal to the
concentration of hydroxide ions. So let's go ahead and write that down. X is equal to the; this is molarity, this is the concentration
of hydroxide ions, and if we know that, we can
eventually get to the pH. That was our original question: to calculate the pH of our solution. So, we could find the pOH from here. I know the pOH is equal
to the negative log of the hydroxide ion concentration. So I could take the negative
log of what we just got, so, the negative log of 1.2 x 10-5, and that will give me the pOH. So let's go ahead and do that. So: -log(1.2 x 10-5) is going to give me a pOH of 4.92 So I go ahead and write: pOH = 4.92 And finally, to find the pH,
I need to use one more thing, 'cause the pH + the pOH is equal to 14. So I can plug in the pOH into here, and then subtract that from 14. So the pH is equal to 14 - 4.92 and that comes out to 9.08 So the pH = 9.08 So we're dealing with a
basic solution for our salts. Let's do another one. Our goal is to calculate the pH of a .050 molar solution
of ammonium chloride. So, for ammonium chloride,
we have NH4+ and Cl- The chloride anions aren't
going to react appreciably with water, but the ammonium ions will. So let's our reaction here. So NH4+ is going to function as an acid. It's going to donate a proton to H2O. So if H2O accepts a proton, that turns into hydronium ions, so H3O+ And if NH4+ loses a
proton, we're left with NH3 So let's start with our
initial concentrations. Well, we're trying to find the
pH of our solution, and we're starting with .050 molar
solution of ammonium chloride. So that's the same concentration
of ammonium ions, right? So this is .050 molar. And if we pretend like this
reaction hasn't happened yet, our concentration of our products is zero. Next, we think about the change, and since NH4+ turns into NH3, whatever we lose for NH4+ is what we gain for NH3. So if we lose a certain
concentration of X for ammonium, if we lose a certain
concentration of X for NH4+ we gain the same concentration, X, for NH3 And therefore, we've also gained the same concentration for hydronium as well. So at equilibrium, our
concentration of ammonium would be: .050 - X; for the hydronium
ion, it would be X; and for ammonia, NH3,
it would be X as well. So we're talking about ammonium
acting as an acid here, and so we're gonna write
an equilibrium expression. We're gonna write Ka. So Ka is equal to: concentration
of products over reactants, so this would be the concentration of: H3O+ times the concentration of NH3 all over, the concentration of NH4+ 'cause we're leaving water out, so, all over the concentration of NH4+ Alright, the concentration of
hydronium ions at equilibrium is X, so we put an "X" in here. Same thing for the concentration of NH3 That would be X, so we
put an "X" into here. This is all over, the
concentration of ammonium, which is .050 - X. So over here, we put 0.050 - X. Next, we need to think about the Ka value. So finding the Ka for this
reaction is usually not something you would find
in a table in a text book. But we know that we're
talking about an acid-base, a conjugate acid-base pair, here. So, NH4+ and NH3 are a
conjugate acid-base pair. We're trying to find the Ka for NH4+ And again, that's not usually
found in most text books, but the Kb value for NH3, is. It's: 1.8 times 10 to the negative five. So for a conjugate acid-base pair, Ka times Kb is equal to Kw. We're trying to find Ka. We know Kb is 1.8 x 10-5 This is equal to: 1.0 times
10 to the negative 14. So we can once again find
Ka on our calculator. So, 1.0 x 10-14... We divide that by 1.8 x 10-5 And so, the Ka value is: 5.6 x 10-10 So if we get some room down here, we say: Ka = 5.6 x 10-10 This is equal to: so it'd
be X squared over here... And once again, we're
going to assume that X is much, much smaller than .050 So we don't have to
worry about X right here, but it's an extremely small number, .050 - X is pretty much the same as .050 So we plug this in and
we have: .050, here. So we need to solve for X. We get out the calculator,
and we're going to take 5.6 x 10-10, and we're
going to multiply by .05 and then we're gonna take the square root of that to get us what X is. So X is equal to 5.3 times
10 to the negative six. So: X = 5.3 x 10-6 X represents the concentration
of hydronium ions, so this is a concentration, right? This is the concentration
of hydronium ions, so to find the pH, all we have to do is take the negative log of that. So, the pH is equal to the negative log of the concentration of hydronium ions. So we can just plug that into here: 5.3 x 10-6, and we can
solve; and let's take the - log(5.3 x 10-6) And so we get: 5.28, if we round up, here. So let me get a little more room... So we're rounding up to
5.28 for our final pH. So pH = 5.28 So we got an acetic solution,
which is what we would expect if we think about the salts that we were originally given for this problem.